Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : Removing the Jeep Compass tailgate shock absorbers

Jeep Compass - Video tutorial

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Shock absorbers
Operation: Removing the Jeep Compass tailgate shock absorbers

In this video tutorial we will see how to quickly and easily disassemble and replace the rear door shock absorbers of a Jeep Compass. First of all, let's get the new shock absorbers, compatible with our car: then we open the boot lid and take something sharp in order to remove the old shock absorbers and unhook them, as shown in the video. At this point it will be enough to take the new shock absorbers and hook them, first on one side and then on the other. Then follow the video from start to finish to better understand how to get the job done!


Posted on 24 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos