Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Jeep Patriot

Model: Jeep Patriot MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Battery

Video tutorial

In this guide, we will see the instructions that will allow us to disassemble and replace the battery of the Jeep Patriot. First, let's open the hood of the vehicle and start unscrewing the battery bracket screw located at the bottom, using a socket wrench with an extension; then we disconnect both battery terminals (positive and negative), removing the battery from its compartment, as shown in the video.

At this point, we install the new battery, of the correct type and with the same amperage; we connect it and check if the engine starts!


Posted on 3 January 2026 by ScegliAuto


Related tutorials

How to Replace the Battery of the Jeep Patriot
How to Replace the Battery of the Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) In this guide, follow the steps that will allow you to remove and replace the battery of the Jeep Patriot, following the instructions below. First, o…
How to Change the Battery on a Jeep Patriot
How to Change the Battery on a Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) This video guide shows how to replace the battery on a first-generation Jeep Patriot, produced from 2007 to 2017. Start by opening the bonnet. Using …
How to Replace the Rear Light Bulb on the Jeep Patriot
How to Replace the Rear Light Bulb on the Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) In this new guide aimed at all of you who own a Jeep Patriot, we will explain step by step how to replace the rear light bulb yourself. First, ensure…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos