Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on a Jeep Patriot

Model: Jeep Patriot MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Battery

Video tutorial

This video guide shows how to replace the battery on a first-generation Jeep Patriot, produced from 2007 to 2017. Start by opening the bonnet. Using a 10mm spanner, begin unscrewing the battery cable bolts.

Remove the negative terminal (black cable) first, followed by the positive terminal (red cable). Next, unscrew the bolt that holds the battery in place at its base.

Once done, you can extract the old battery and install a new one by following the procedure in reverse to finish the job.


Updated on 11 August 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Jeep Patriot
How to replace the battery of the Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) In this guide, we will see the instructions that will allow us to disassemble and replace the battery of the Jeep Patriot. First, let's open the hood…
How to Replace the Battery of the Jeep Patriot
How to Replace the Battery of the Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) In this guide, follow the steps that will allow you to remove and replace the battery of the Jeep Patriot, following the instructions below. First, o…
How to open the fuel cap of the Jeep Patriot
How to open the fuel cap of the Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) Today we will explain how to open the fuel cap of the Jeep Patriot. To open the fuel cap, we need to turn off the vehicle and press on the tank door …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos