Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Turn Off the Tyre Pressure Warning Light on a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tire pressure warning light

See other generations:
Video tutorial

The Jeep Compass MK2 has a direct monitoring system (each wheel has its own sensor): the light will turn off automatically after the pressures have been restored according to the instructions on the sticker located on the driver’s door pillar. Simply drive for a few minutes; there is nothing else to do. The vehicle must be driven for at least 15 to 20 minutes at a speed above 15 mph; the sensors need to detect the rotation of the wheels to transmit the new value to the control unit.

If you have just changed the tyres, remember to check that the sensors are fitted; otherwise, the light will never turn off.


Posted on 1 June 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) When the tyre pressure warning light illuminates on the Jeep Compass display along with an audible signal, it means that at least one of the four tyr…
How to reset the tyre pressure warning light on the Jeep Compass?
How to reset the tyre pressure warning light on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) Reset the tyre pressure warning light on the Jeep Compass by first inflating the tyres to the correct pressure value: this is indicated on the sticke…
How do you reset the tire pressure warning light on the Jeep Compass?
How do you reset the tire pressure warning light on the Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) On the instrument panel of the Jeep Compass, the tire pressure warning light can be reset by inflating the tires to the correct inflation pressure va…

How to adjust the handbrake on the Smart Fortwo?

To adjust the handbrake on the Smart Fortwo, loosen the screws securing the left rear wheel so that it can be removed: after the wheel has been removed from its seat, loosen the screws securing the corresponding brake drum, locating the shoes and the handbrake mechanism. This can be adjusted by tightening or loosening the shoes to regulate the intensity of the handbrake; once the adjustment is complete, verify that the operation has been successfully finished.

Watch the video!


by ScegliAuto

More videos