Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tire pressure warning light

See other generations:
Video tutorial

Reset the tyre pressure warning light on the Jeep Compass by first inflating the tyres to the correct pressure value: this is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated to this pressure, turn on the ignition so that the sensors can detect the new pressure value; if the warning light does not turn off immediately, you may need to drive a few miles to give the sensors time to register the new values and turn off the light.


Updated on 4 October 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) When the tyre pressure warning light illuminates on the Jeep Compass display along with an audible signal, it means that at least one of the four tyr…
How to Reset the Tyre Pressure Warning Light on the Jeep Compass
How to Reset the Tyre Pressure Warning Light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Follow the main steps to reset the tyre pressure warning light on the Jeep Compass. Before starting the operation, ensure all four tyres are at the c…
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the tyre pressure warning light on the Jeep Compass, inflate all tyres to the correct pressure value, which is indicated on the sticker affi…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos