Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of a Jeep Compass

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

Let’s look at how to remove the rear light on a Jeep Compass. In this video, see how to take off the light and replace the bulbs.

Open the boot lid, and using a screwdriver, remove the securing screws located at the side of the light (right side). Disconnect the rear light from its housing once all screws are removed (disconnect the power connectors) and replace any damaged bulbs with new ones (same size and voltage).

Refit the new light with the accompanying screws and reconnect the power connectors. Test the correct operation of the previously installed bulbs.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Change Light on a Jeep Compass
How to Reset the Oil Change Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Before you can start, sit in the driver's seat of your Jeep Compass. Begin by activating the instrument cluster without starting the engine by pressi…
Where to Find and How to Access the Cigarette Lighter Fuse on a Jeep Compass?
Where to Find and How to Access the Cigarette Lighter Fuse on a Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) The cigarette lighter fuse on your Jeep Compass is located inside the fuse box. The fuse box is situated within the engine bay, near the battery. To …
Replacement of the front headlight bulb of the Jeep Compass
Replacement of the front headlight bulb of the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Today we will see the instructions that will allow us to disassemble and replace the headlight bulb of the Jeep Compass. First, we open the hood of t…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos