Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Light Bulb on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Tail light bulb

Start by releasing the light from its housing by unfastening the clip that secures it. You can use a flathead screwdriver to assist with this operation. Once the light is removed from the boot, disconnect the connector attached to it. At this point, to remove the bulb from its housing, simply pull it out. This completes the removal of the blown bulb. To install the new bulb, simply follow the steps in reverse, and you will have successfully completed the replacement.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Number Plate Light Bulb on a Jeep Renegade
How to Replace the Rear Number Plate Light Bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you begin, open the tailgate of your Jeep Renegade. Start by unclipping and removing the rear number plate light from the tailgate, using a fl…
How to Remove the Number Plate Light Unit on a Jeep Renegade
How to Remove the Number Plate Light Unit on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) How do you replace the number plate light bulb on a Jeep Renegade? Use a screwdriver or plastic trim tool to remove the number plate light located in…
How to Replace the Number Plate Lights on the Jeep Renegade
How to Replace the Number Plate Lights on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Today we will see the information that will allow us to remove and replace the number plate bulbs on the Jeep Renegade. First, move to the rear of th…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos