Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Jeep Cherokee?

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Battery

In this video, see how to replace the battery in a Jeep Cherokee; it is a very simple operation. Start by opening the bonnet and disconnect the negative terminal using a 10 mm spanner. Next, disconnect the positive terminal. The battery is held in place by a lower bracket secured with a 13 mm bolt; undo it, remove the protective cover, and at this point, you can extract the battery from its housing. Insert the replacement and reassemble everything by following the reverse procedure, connecting the positive terminal first and then the negative.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Battery of the Jeep Cherokee MK5
Replacing the Battery of the Jeep Cherokee MK5
Jeep Cherokee (2013-2023 / KL, MK 5) Today, you will learn how to remove and replace the battery of the fifth series Jeep Cherokee. First, open the bonnet and locate the battery on the r…
How to Replace the Battery in a Jeep Grand Cherokee
How to Replace the Battery in a Jeep Grand Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) This video demonstrates how to replace the battery in a Jeep Grand Cherokee latest model. It is a fairly simple procedure. First, ensure the vehicle …
Removing the Fuse Box on a Jeep Cherokee
Removing the Fuse Box on a Jeep Cherokee
Jeep Cherokee (1984-2001 / XJ, MK 2) To remove the fuse box on a Jeep Cherokee, open the car's door, pull up the engine compartment release lever located at the bottom left of the dashbo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos