Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in a Jeep Grand Cherokee?

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Air filter

In this video, you will see how to replace the air filter in a Jeep Grand Cherokee, a very simple and quick operation. After obtaining the correct replacement filter, as indicated in the video and easily available online, lift the bonnet and open the airbox by unlocking the two clips located at the bottom. At this point, remove the old filter, clean the inside thoroughly if necessary, and insert the replacement, ensuring it is positioned the right way. Finally, reposition the top part of the airbox and secure the two clips.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a 2021 Jeep Grand Cherokee
How to Replace the Cabin Air Filter in a 2021 Jeep Grand Cherokee
Jeep Grand Cherokee (2021-2026 / MK 5, WL) To replace the cabin air filter in your 2021 Jeep Grand Cherokee, follow these steps. First, go to the passenger side and open the glove compartment.…
How to Replace the Cabin Air Filter on the Jeep Grand Cherokee
How to Replace the Cabin Air Filter on the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this guide, you will learn how to remove and replace the cabin air filter on the Jeep Grand Cherokee in simple steps. First, open the front passen…
How to Replace the Cabin Air Filter on a Jeep Grand Cherokee 4
How to Replace the Cabin Air Filter on a Jeep Grand Cherokee 4
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) If you own a Jeep Grand Cherokee Mk4 and want to learn how to correctly replace the cabin air filter, follow the procedure below. First, reach the pa…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos