Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Jeep Grand Cherokee?

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Cabin air filter

Replacing the cabin filter in the Jeep Grand Cherokee is a very simple and quick operation; let’s see how to proceed in this tutorial. The filter is located behind the glove compartment on the passenger side, so start by opening the drawer and unhooking the right end stop cord. Next, remove the upper secondary compartment and unclip the internal corners from the rest of the dashboard, allowing you to lay the drawer on the floor. At this point, you can open the filter door and proceed with the replacement, ensuring it is positioned in the correct orientation. Finally, reassemble everything by following the reverse procedure.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on Jeep Grand Cherokee?
How to Replace the Cabin Filter on Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To replace the cabin filter on the Jeep Grand Cherokee, open the glove compartment from the passenger side and push sideways so that the compartment …
How to Replace the Cabin Air Filter on a Jeep Grand Cherokee 4
How to Replace the Cabin Air Filter on a Jeep Grand Cherokee 4
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) If you own a Jeep Grand Cherokee Mk4 and want to learn how to correctly replace the cabin air filter, follow the procedure below. First, reach the pa…
How to Replace the Cabin Air Filter in a 2021 Jeep Grand Cherokee
How to Replace the Cabin Air Filter in a 2021 Jeep Grand Cherokee
Jeep Grand Cherokee (2021-2026 / MK 5, WL) To replace the cabin air filter in your 2021 Jeep Grand Cherokee, follow these steps. First, go to the passenger side and open the glove compartment.…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos