Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Valve Cover Gasket on a Jeep Cherokee

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001

This guide provides the main instructions for removing and replacing the valve cover gasket on a Jeep Cherokee. First, open the bonnet and start by removing the throttle cable retainers; then unscrew all the screws from the valve cover, located on the sides, using a socket wrench with an extension. At this point, remove the gasket and replace it with the new one of the correct type; clean the base of the cover thoroughly and install the new gasket properly to avoid oil leaks!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Window Seal on a Jeep Cherokee
Replacing the Window Seal on a Jeep Cherokee
Jeep Cherokee (1984-2001 / XJ, MK 2) In this video tutorial, you will see the essential steps to remove and replace the window seal of the windows on a second series Jeep Cherokee. First…
…
How to replace the fuse of the cigarette lighter socket of the Jeep Cherokee?
How to replace the fuse of the cigarette lighter socket of the Jeep Cherokee?
Jeep Cherokee (2002-2007 / KJ, MK 3) Replacing the fuse for the cigarette lighter socket of the 2003 Jeep Cherokee is a task that can be done independently. The fuses for the socket are …

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos