Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Window Seal on a Jeep Cherokee

Model: Jeep Cherokee MK 2, XJ - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995

See other generations:
Video tutorial

In this video tutorial, you will see the essential steps to remove and replace the window seal of the windows on a second series Jeep Cherokee. First, open the front door and use pliers or a lever to pull the window seal upwards; then perform the same operation on the rear part of the vehicle if they are damaged.

At this point, clean the sliding area of the window and refit the seals until they click into place, following the video to the end!


Updated on 15 April 2026 by ScegliAuto


Related tutorials

Replacing the Front Wiper Blades on the Jeep Cherokee
Replacing the Front Wiper Blades on the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this short and simple video, you will see the steps to dismantle and replace the wiper blades on the Jeep Cherokee. First, move to the front of yo…
How to Replace the Windscreen Wiper Blades on a Jeep Cherokee?
How to Replace the Windscreen Wiper Blades on a Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) To replace the windscreen wiper blades on a Jeep Cherokee, lift the wiper arm and position the blade perpendicular to the arm. This will allow you to…
Replace Remote Battery for Jeep Cherokee
Replace Remote Battery for Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Is the battery of your Jeep Cherokee flat and needs replacing? Here's how to do it. Open the Jeep remote. Remove the metal key. Once the metal key is…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos