Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Light in the Jeep Gladiator?

Model: Jeep Gladiator JT - Years 2020-2026
Part: Service warning light

The video shows us two procedures to reset the engine oil light. The first involves turning on the ignition (but not the engine!) and, within 10 seconds, slowly pressing the accelerator pedal all the way down three times before turning off the ignition. The second requires accessing the onboard menu. Press the "start/stop" button twice. Use the controls on the steering wheel to navigate through the menu options until you reach the sub-menu "Oil Life." Hold down the "ok" button on the steering wheel until the indicator resets to 100%.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil service in the Jeep Gladiator?
How to reset the oil service in the Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) In this tutorial we can see how to reset the oil service in the Jeep Gladiator, an extremely simple and quick operation, to be carried out only once …
How to Reset the Oil Service on a Jeep Gladiator?
How to Reset the Oil Service on a Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) In this tutorial, you will see how to reset the oil service on a Jeep Gladiator, a very simple and quick operation to perform only after completing t…
Where is the fuse box located in the Jeep Gladiator?
Where is the fuse box located in the Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) If you own a Jeep Gladiator and need to locate the box that contains all the vehicle's fuses, all you have to do is pay attention to the following st…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos