Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on a Jeep Gladiator

Model: Jeep Gladiator JT - Years 2020-2026
Part: Engine oil

Follow the steps to perform routine maintenance by replacing the engine oil and oil filter on the Jeep Gladiator. First, lift the vehicle and start unscrewing the oil drain plug located on the oil pan using a socket wrench, allowing it to drain into a container for about ten minutes. Next, move to the engine compartment and use the appropriate tool to unscrew and remove the oil filter, as shown in the video. At this point, replace the filter cartridge with a new one, changing the gasket, and finally pour in the new engine oil!

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Jeep Gladiator?
How to Change the Engine Oil in a Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) In this tutorial, you will see how to change the oil in a Jeep Gladiator, a very simple operation. First, to work safely, ensure the engine is comple…
How to Reset the Oil Service on a Jeep Gladiator?
How to Reset the Oil Service on a Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) As we can see in this tutorial, resetting the oil service on a Jeep Gladiator is an extremely simple and quick operation. Before doing this, make sur…
How to Reset the Oil Service Light on a Jeep Gladiator?
How to Reset the Oil Service Light on a Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) In this tutorial, you will learn how to reset the oil service light on a Jeep Gladiator. This operation is extremely simple and quick, and should be …

Other guides you may be interested in

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos