Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the oil pan of the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Oil pan

These short and simple steps will show us the procedure for disassembling and replacing the engine oil pan of the Jeep Renegade. First, lift the vehicle and start draining the engine oil by unscrewing the drain plug and letting it drain into a container for about ten minutes; then we unscrew the fixing screws of the oil pan found on the sides, in order to remove it, as shown in the video. We also replace the engine oil filter, along with the oil; we install the oil pan with the new gasket, following the video tutorial until the end!

Posted on 27 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Oil Change on a Jeep Renegade
Oil Change on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Changing the oil and filter on a Jeep Renegade? Here’s how to remove it from the engine bay. Lift the bonnet and secure it, then use a strap wrench t…
How to Change the Engine Oil and Oil Filter on a Jeep Renegade 2.4 MultiAir
How to Change the Engine Oil and Oil Filter on a Jeep Renegade 2.4 MultiAir
Jeep Renegade (2014-2021 / ) In this guide, you will learn how to perform the routine maintenance service for changing the oil and oil filter on a Jeep Renegade 2.4 MultiAir, as …
Engine Oil Change on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Changing oil on a Jeep Renegade? Here’s how to drain the engine oil on a Jeep Renegade. Open the car door and pull up the engine compartment release …

Other guides you may be interested in

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos