Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ignition Switch in a Jeep Cherokee?

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001
Part: Checks and maintenance

To replace the ignition switch in a Jeep Cherokee, unscrew the screw located at the bottom of the steering column, near the switch itself. This will allow you to pull the switch outwards and replace it with a new spare part. The new switch should then be inserted into its housing and secured by tightening the screw at the bottom of the steering column. Once the new lock is inserted and secured, check that it functions correctly.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Immobiliser from the Jeep Grand Cherokee
How to Remove the Immobiliser from the Jeep Grand Cherokee
Jeep Cherokee (2002-2007 / KJ, MK 3) To remove the immobiliser from the Jeep Grand Cherokee, first, slide off the plastic cover around the ignition switch and loosen the fixing screws ar…
How to Reset the Service Light on a Jeep Cherokee?
How to Reset the Service Light on a Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) To reset the Service light on the Jeep Cherokee, insert the ignition key, turning it in the ignition switch, and then press the button to start the i…
How do you reset the Service light on the Jeep Cherokee?
How do you reset the Service light on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) To completely make the Service light disappear from the instrument panel of the Jeep Cherokee, you will need to insert the ignition key into the corr…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos