Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Shock Absorber on a Jeep Cherokee

Model: Jeep Cherokee MK 2, XJ - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Shocks

See other generations:
Video tutorial

To replace the front shock absorber on a Jeep Cherokee, loosen the bolts securing the wheel corresponding to the shock absorber being replaced. Once the wheel is removed, loosen the bolts securing the shock absorber, starting with the upper part and then the lower part.

After the component is freed, pull it out from the side and replace it with a new part. The new shock absorber can then be secured with the appropriate bolts, and the corresponding wheel can be reinstalled.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper from a Jeep Cherokee
How to Remove the Front Bumper from a Jeep Cherokee
Jeep Cherokee (1984-2001 / MK 2, XJ) To remove the front bumper from a Jeep Cherokee, access the inside of the bumper to disconnect the underlying connectors. Once these are disconnected…
How to Remove the Front Bumper of a Jeep Cherokee
How to Remove the Front Bumper of a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Today, in this short and simple guide, we will see the procedure to remove and replace the front bumper of a Jeep Cherokee. First, open the bonnet of…
How to Replace the Rear Suspension of a Jeep Cherokee
How to Replace the Rear Suspension of a Jeep Cherokee
Jeep Cherokee (1984-2001 / MK 2, XJ) In today's tutorial, you will learn how to remove and replace the rear shock absorbers of a Jeep Cherokee by following these simple and quick steps. …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos