Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Renegade
    4. : How to remove the airbags of the Jeep Renegade

Jeep Renegade - Video tutorial

Model: Jeep Renegade BU, 520, MK 1 - Years 2014-2023
Part: Airbags
Operation: How to remove the airbags of the Jeep Renegade

In this video tutorial you can see how the airbags of the Jeep Renegade are removed, following the steps that will allow you to work in perfect autonomy. First you have to get into your car and sit in the driver's seat. You need to get a screwdriver. The screwdriver is inserted perpendicular, in the hole under the steering wheel at the rear; being careful not to pass sideways, but perpendicularly; when the screwdriver goes all the way in, it presses the tab. Do this both in the hole on the right and also in the hole on the left and at this point the airbag must detach from its seat.


Posted on 25 October 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Jeep Renegade 2014-2023 - How to deactivate the passenger airbag in Jeep Renegade? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos