Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the airbag of the 2018 Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Airbag

The steps to remove the airbag from the steering wheel of a 2018 Jeep Renegade are simple and quick to do independently. The first step is to turn the steering wheel vertically. The second step is to insert a torx key or a flat-tipped screwdriver into the side hole in order to push the internal lever to the left and remove the system. The third step is to disconnect the connector in order to remove the airbag. If necessary, you can continue with the removal of the steering wheel by unscrewing the central nut. The assembly of the system follows the reverse procedure.

Posted on 24 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Airbag from a Jeep Renegade
How to Remove the Airbag from a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by releasing the lower clips that secure the airbag to the steering wheel…
How to Disable the Passenger Airbag on a Jeep Renegade
How to Disable the Passenger Airbag on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Today’s steps will show you how to disable the front passenger airbag on a Jeep Renegade, following the instructions below. First, get in the vehicle…
How to Remove the Steering Wheel Airbag in the Jeep Renegade?
How to Remove the Steering Wheel Airbag in the Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this tutorial, you will see how to remove the driver's airbag in the Jeep Renegade, a very simple and quick operation. To do this, you will only n…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos