Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag in the Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Airbag

In this tutorial, you will see how to remove the driver's airbag in the Jeep Renegade, a very simple and quick operation. To do this, you will only need two small long screwdrivers. First, disconnect the negative terminal of the battery to work safely and avoid accidental airbag activation. Next, fully insert the two screwdrivers into the indicated holes to unlock the internal clips, then remove the airbag and disconnect the connector at the back. To install the replacement, simply insert it into the housing; it will lock automatically.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Airbag from a Jeep Renegade
How to Remove the Airbag from a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by releasing the lower clips that secure the airbag to the steering wheel…
How to Remove the Steering Wheel on a Jeep Renegade
How to Remove the Steering Wheel on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) How do you remove the steering wheel from a Jeep Renegade? Follow this guide. Before removing the steering wheel, insert a screwdriver into the gaps …
How to Disable the Passenger Airbag on a Jeep Renegade
How to Disable the Passenger Airbag on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Today’s steps will show you how to disable the front passenger airbag on a Jeep Renegade, following the instructions below. First, get in the vehicle…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos