Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the airbag on the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Airbag

If you need to install a pushchair in the front passenger seat, you must deactivate the passenger airbag. You can find the instructions in this description and also refer to the video. First, access the driver's seat and turn on the ignition. Then, use the controls on the left side of the steering wheel to scroll through the various options on the onboard computer until you select "safety". Press the OK button and select "passenger airbag". At this point, you can choose to deactivate the airbag, and once done, the orange "airbag deactivated" warning light will illuminate on the central console.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Disable the Passenger Airbag on a Jeep Renegade
How to Disable the Passenger Airbag on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Today’s steps will show you how to disable the front passenger airbag on a Jeep Renegade, following the instructions below. First, get in the vehicle…
How to Remove the Airbag from a Jeep Renegade
How to Remove the Airbag from a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by releasing the lower clips that secure the airbag to the steering wheel…
How to Disable the Passenger Airbag on a Jeep Renegade
How to Disable the Passenger Airbag on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) This tutorial shows how to disable the passenger airbag on a first-generation Jeep Renegade, produced from 2014 to 2022. Once the vehicle's ignition …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos