Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light of the 2017 Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

Video tutorial

After replacing the engine oil and filter in your 2017 Jeep Renegade, you need to manually reset the warning light to prevent it from illuminating. Below, you will discover the necessary steps.

First, ensure you start the entire procedure with the car completely off. Then, press the "Start/Stop" button twice in succession and turn on the instrument panel. Immediately after, within ten seconds, press the accelerator pedal fully three times in succession.

Finally, turn off and turn on the panel to complete the reset.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Change Light on a Jeep Renegade?
How to Reset the Oil Change Light on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) Resetting the oil change light on a Jeep Renegade is very simple. Follow this procedure only after changing the oil and the corresponding filter. To …
How to reset the oil light on the 2020 Jeep Renegade
Jeep Renegade (2014-2023 / ) Resetting the oil light on the 2020 Jeep Renegade is a simple and quick process to be done independently. First, turn on the vehicle's instrument pan…
How to Reset the Oil Light on a Jeep Renegade
How to Reset the Oil Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) To manually reset the engine oil light on your Jeep Renegade, follow all the steps described in this guide. First, turn on the instrument cluster by …

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos