Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb of the Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Headlight bulb

See other generations:
Video tutorial

Today, we will see through these brief instructions how to remove and replace the front headlamp bulb of the Jeep Grand Cherokee. First, open the bonnet of the vehicle and begin by removing the air filter box by undoing the fastening screws; then remove the plastic cover of the bulb and disconnect the electrical connector to take it out of the optical unit, as shown in the video.

At this point, install the new dipped and main beam bulb, check its operation, and finally reassemble the air filter box!


Updated on 9 August 2026 by ScegliAuto


Related tutorials

Replacement of the Front Light Bulb on a Jeep Grand Cherokee
Replacement of the Front Light Bulb on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Here are the useful instructions for removing and replacing the front light bulbs on the Jeep Grand Cherokee. First, open the vehicle's bonnet and st…
Where are the Fuses on a Jeep Grand Cherokee?
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) The fuses on the Jeep Grand Cherokee are located within specific fuse boxes installed in the vehicle: this car model has two. The first is located in…
Replacing the Headlamp Bulbs on a Jeep Grand Cherokee
Replacing the Headlamp Bulbs on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Today, we will look at the instructions needed to remove and replace the headlamp bulbs on a Jeep Grand Cherokee. First, open the bonnet of the vehic…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos