Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Kawasaki Ninja 650?

Model: Kawasaki Ninja 650
Part: Engine oil

This video is currently unavailable

To change the engine oil on a Kawasaki Ninja 650, start by warming up the engine for a few minutes so that the oil becomes more fluid and easier to drain. Turn off the bike and place it in a stable position using the stand.

Locate the oil drain plug at the bottom of the engine and place a container underneath to collect the old oil. Use a spanner to unscrew the plug and allow the used oil to drain completely. Once finished, securely reattach the drain plug.

Proceed to pour new oil into the engine, following the quantity specifications indicated in the owner's manual. Start the bike briefly to circulate the new oil, then turn it off and check for any leaks.

Recheck the oil level, adding more if necessary, and ensure everything is in order.


Updated on 20 October 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Kawasaki Ninja 650?
How to Change the Engine Oil on a Kawasaki Ninja 650?
Ninja 650 To change the engine oil on a Kawasaki Ninja 650, it is important to start by warming up the engine for a few minutes, so the oil becomes more fluid …
Replacement of the engine oil cup of the Kawasaki Ninja 650
Replacement of the engine oil cup of the Kawasaki Ninja 650
Ninja 650 Today's instructions will allow us to disassemble and replace the oil sump of the Kawasaki Ninja 650. First, we put the motorcycle on the stand and s…
How to replace the engine oil in the Kawasaki Ninja 650?
How to replace the engine oil in the Kawasaki Ninja 650?
Ninja 650 In this tutorial, we can see how to replace the engine oil in the Kawasaki Ninja 650, an extremely simple and quick operation. First of all, let's ma…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos