Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the motor oil of a Kawasaki Vulcan 650?

Model: Kawasaki Vulcan 650 S
Part: Engine oil

Video tutorial

To change the motor oil of a Kawasaki Vulcan 650, start by warming up the engine for a few minutes to make the oil more fluid. Turn off the engine and put the motorcycle on a stand to ensure stability.

Locate the oil drain plug, located on the bottom side of the engine. Place a collection tray under the plug and use a wrench to unscrew it, allowing the used oil to completely drain into the tray.

Once all the oil has drained out, securely screw the drain plug back in. Find the oil fill cap on the side of the engine and remove it. Use a funnel to slowly pour the new oil in the amount recommended by the owner's manual. Make sure not to exceed the indicated level.

After completing the filling, put the fill cap back on and tighten it well. Start the engine for a few minutes to circulate the new oil, then turn it off and check for any leaks.

This ensures that the new oil is evenly distributed in the engine and everything is in order.


Posted on 5 May 2025 by ScegliAuto


Related tutorials

How to change the engine oil on the Kawasaki Vulcan 650 S?
How to change the engine oil on the Kawasaki Vulcan 650 S?
Vulcan 650 S To change the engine oil on the Kawasaki Vulcan 650 S, loosen the bolt located at the central lower part of the bike, allowing the used oil to drain …
How to Change the Engine Oil in the Kawasaki Vulcan 650 S?
How to Change the Engine Oil in the Kawasaki Vulcan 650 S?
Vulcan 650 S This tutorial demonstrates how to change the engine oil in the Kawasaki Vulcan 650 S, a very simple and quick operation. First, wait for the engine t…
How to replace the motor oil in the Kawasaki Vulcan 650 S?
How to replace the motor oil in the Kawasaki Vulcan 650 S?
Vulcan 650 S In this tutorial, we can see how to replace the motor oil in the Kawasaki Vulcan 650 S, an extremely simple and quick operation. First of all, make s…

How to Replace the Front Headlamp of the Harley Davidson Street Glide

Today, we will provide step-by-step instructions to remove and replace the front headlamp of the Harley Davidson Street Glide. First, place the motorcycle on a stand and begin by removing the metal side frame by undoing the fixing screw; then remove the front optical unit by disconnecting the bulb's electrical connector, as shown in the video. At this point, install the new optical unit, checking its operation and making adjustments if necessary; finally, reattach the metal side frame.

Watch the video!


by ScegliAuto

More videos