Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's steps will show us how to disassemble and replace the engine air filter and spark plugs of the Kawasaki Z1000 motorcycle. First, we put the motorcycle on the stand and start by disassembling and removing the fuel tank; to do this, we remove the plastic fairings and unscrew the tank screws, as shown in the video. At this point, we unscrew the screws of the air filter cover to remove and replace the cartridge with a new one; we disconnect the spark plug connectors and use a socket wrench with an extension to remove and replace them with new ones!

Posted on 20 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter and Spark Plugs on the Kawasaki Z1000
How to Replace the Air Filter and Spark Plugs on the Kawasaki Z1000
Z1000 In this video tutorial, follow the instructions to remove and replace the engine air filter and spark plugs on the Kawasaki Z1000 motorcycle. First, …
How to Replace the Spark Plugs on the Kawasaki Z1000
How to Replace the Spark Plugs on the Kawasaki Z1000
Z1000 Next, learn how to replace the engine spark plugs on the Kawasaki Z1000 motorcycle. First, place your bike on a stand and start by removing the rider…
How to replace the spark plugs in the Kawasaki Z1000?
How to replace the spark plugs in the Kawasaki Z1000?
Z1000 In this tutorial we can see how to replace the spark plugs in the Kawasaki Z1000, a very simple operation. First of all, we wait for the engine to co…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos