Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial, we can see how to replace the motor oil in the Kawasaki Vulcan 650 S, a very simple and quick operation. First of all, make sure that the engine is cool enough, then place a container under the motorcycle, locate the drainage hole bolt and unscrew it using a 17mm socket wrench. Let all the oil in the system drain out, then unscrew the old filter and tighten both the replacement and the bolt. At this point, all that's left to do is to pour the necessary amount of oil through the designated hole.

Posted on 26 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Vulcan 650 S To change the engine oil on the Kawasaki Vulcan 650 S, loosen the bolt located at the central lower part of the bike, allowing the used oil to drain …
Vulcan 650 S .. In this tutorial, we can see how to replace the motor oil in the Kawasaki Vulcan 650 S, an extremely simple and quick operation. First.. …
Vulcan 650 S To change the engine oil on the Kawasaki Vulcan 650 S, loosen the drain plug located at the bottom centre of the bike: by unscrewing it, the used oil…

How to Replace the Air Filter on a Harley Davidson Dyna?

To replace the air filter on a Harley Davidson Dyna, loosen the screws securing the cover located on the right side of the bike, just below the fuel tank. Once the cover is removed, you will locate the filter underneath: it must be removed from its housing by unscrewing the fastening screws and sliding it out from its compartment. After the old filter has been removed, position the new replacement part, securing it in place with the screws and covering everything with the cover.

Watch the video!


by ScegliAuto

More videos