Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kawasaki Ninja 650
Part:

To replace the levers on the Kawasaki Ninja 650, you will need to loosen the nuts that secure the pins holding the levers to the sides of the handlebars. Once the pins have been removed, you will need to disconnect the levers from their respective cables by removing the corresponding nuts as well. After the old levers have been removed, you can connect the new ones to their cables. Then, you will need to position them on the sides of the handlebars to insert the pins. After installation, you should check that everything is functioning correctly.

Posted on 9 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fuel Tank from a Kawasaki Ninja 650
How to Remove the Fuel Tank from a Kawasaki Ninja 650
Ninja 650 Before you can start, position your Kawasaki Ninja 650 on the side stand. Begin by removing the seat and the side covers of the tank by simply unscre…
How to adjust the time on the Kawasaki Ninja 650?
How to adjust the time on the Kawasaki Ninja 650?
Ninja 650 In this tutorial we can see how to adjust the time on the Kawasaki Ninja 650, an extremely simple and quick operation, to be carried out for example …
How to Set the Rev Counter on the Kawasaki Ninja 650
How to Set the Rev Counter on the Kawasaki Ninja 650
Ninja 650 This guide explains how to set the rev counter on the 2023 Kawasaki Ninja 650 scooter quickly and easily. To perform this simple operation, turn on t…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos