Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kawasaki Z750r
Part: Air filter

Descriptive guide for replacing the air filter on a Kawasaki Z750 from 2007 to 2012. Obtain the Nypso 100603190 air filter. Position the bike on its side stand. Using a 4mm Allen key, unscrew the support screw of the small side panel with vents on the right side. Under the side panel, you will find another Allen screw that supports the larger side panel from under the seat to under the tank. Repeat the same on the other side. Unscrew the 6mm Allen screw that supports the rear of the tank. Lift the tank and slide it back, being careful to disconnect the fuel hose and the electrical connector of the fuel pump once lifted. Unscrew the star screws on the top of the air filter box, lift the cover and remove the filter, replace it with the new filter and reassemble everything as per disassembly.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radiator Fluid on a Kawasaki Z750 R
How to Replace the Radiator Fluid on a Kawasaki Z750 R
Z750r In this video, see how to replace the radiator fluid on a Kawasaki Z750 R by following the instructions below. First, remove the rear seat and the ri…
How do you replace the battery of the Kawasaki Z750R?
How do you replace the battery of the Kawasaki Z750R?
Z750r To replace the battery of the Kawasaki Z750R, you will need to insert the key into the lock located on the bottom of the rear fender: this will allow…
How to replace the engine oil and oil filter of the Kawasaki Z750R
How to replace the engine oil and oil filter of the Kawasaki Z750R
Z750r We will briefly see the procedure for replacing the engine oil and oil filter while performing the routine maintenance service on the Kawasaki Z750R …

How to replace the engine oil in the Ducati Monster S2R 1000?

In this tutorial we can see how to replace the motor oil in the Ducati Monster S2R 1000, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container underneath it, locate the drain plug and unscrew it using a hex key. Next, unscrew the cap of the secondary filter, remove it and clean it from any dirt residue. At this point, all that remains is to unscrew the main filter, tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos