Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Belt Light on a Kawasaki KFX700

Model: Kawasaki Kfx 700
Part: Warning light – error code

Video tutorial

On this type of vehicle, the maintenance light comes on every 100 hours of use. To turn it off, switch off the vehicle and remove the key from the ignition, then remove the seat to access the area underneath. You will find two two-pin connectors, one grey and one black, under the seat, near the fuel tank.

Disconnect both from their sockets. Take the black connector and insert it into the grey socket; take the grey connector and insert it into the black socket.

Now, with the connectors crossed, insert the key and turn on the ignition without starting the engine. Keep the ignition on for 8 seconds, then turn it off and remove the key. Now return to the connectors and restore the original connection.

Refit the seat and turn on the ignition normally; the belt light should now be off.


Posted on 15 August 2026 by ScegliAuto


Related tutorials

Resetting the service light on the Kawasaki Z900
Resetting the service light on the Kawasaki Z900
Z900 Briefly, we will see the instructions that will allow us to perform the routine maintenance service and reset the service light on the Kawasaki Z900 …
How do you replace the belt on the Kawasaki J300?
How do you replace the belt on the Kawasaki J300?
J300 To replace the belt of the Kawasaki J300, you need to loosen the screws that secure the cover located near the rear wheel, on the left side of the mo…
How to Reset the Service Light on the Kawasaki ZX-10R
How to Reset the Service Light on the Kawasaki ZX-10R
Zx 10r The instructions in the video will show you how to reset the service light for the routine maintenance oil change on the Kawasaki ZX-10R. First, turn…

How to Adjust the Suspension on a TM Racing 300?

To adjust the suspension on a TM Racing 300, locate the rear shock absorber of the bike: this will be found inside the vehicle, in the area between the rear mudguard and the rear swingarm. Once the shock absorber is located, adjust it by tightening or loosening the bolts found at its lower and upper parts: following the instructions in the manual, you can perform the suspension adjustment and thus adjust the height of the bike according to your riding needs.

Watch the video!


by ScegliAuto

More videos