Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This is a 2011 model. To replace the front headlight bulb, access it from the rear, as shown in the video: slightly unscrew the round cover behind the headlight until you hear a noise indicating it has been released. Disconnect the connector by simply pulling it by hand, then unclip the metal retainer holding the bulb in place and remove it. Proceed in reverse for reassembly, inserting the new bulb and securing it with the metal retainer, then reconnect the connector and refit the rear cover.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Exhaust End Can and Catalytic Converter from the Kawasaki ZX10R.
Ninja Zx 10r Before proceeding with the maintenance of your Kawasaki ZX10R, ensure the bike is stable and secure on its stand. Begin by unscrewing the various scr…
How do you replace the air filter of the Kawasaki Ninja ZX-10R?
How do you replace the air filter of the Kawasaki Ninja ZX-10R?
Ninja Zx 10r It will be possible to replace the air filter of the Kawasaki Ninja ZX-10R by loosening the screws that secure the side panels of the motorcycle loca…
How to Access the Fuse Box of the Kawasaki Ninja ZX-10R
How to Access the Fuse Box of the Kawasaki Ninja ZX-10R
Ninja Zx 10r In this guide, you will learn how to access the fuse box of the Kawasaki Ninja ZX-10R motorcycle. First, place the bike on a stand and start removing…

Guide to replacing the starter motor of the Piaggio Vespa ET4 150

Today's guide will show us how to disassemble and replace the starter motor of the Piaggio Vespa ET4 150 scooter, in simple steps. First, we put the scooter on the center stand and lift the seat; we remove the battery, disconnecting both terminals, and then remove the compartment under the seat, as shown in the video. At this point, we disconnect the intake hose to access the starter motor, unscrewing its fastening screws and disconnecting the wiring to remove it; all that's left is to replace it with the new original one, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos