|
Do it yourself
| |||
| ||||
|
Model: Kawasaki Versys
To replace the coolant in your Kawasaki Versys, remove the three plastic panels located on the right side of the bike, just below the fuel tank. Once these side panels are removed, take off the one near the right footpeg to access the coolant drain plug. Loosen the bolt, and the coolant will start to flow out, allowing you to collect it in a container. When it has fully drained, close the plug and top up the system by pouring coolant through the opening under the tank, beneath the previously removed panels.
Updated on 1 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Versys
In this video we can see what information we can obtain from the dashboard of the Kawasaki Versys: we turn on the ignition, and if we press the butto…
Versys
To replace the bulb on the Kawasaki Versys, unclip the fastening rivets located at the sides of the fairing so that the front fairing under the winds…
Versys
To remove the side panels of the Kawasaki Versys fairing, loosen the bolts located at the top of the panel, just below the grips. These are 4 mm scre…
|
How to Service the Beta RR 350
This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |