Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kawasaki Z1000
Part: Wheel

Today, in this short and simple guide, you will find instructions on how to remove the rear wheel and possibly replace the tyre on your Kawasaki Z1000. First, place your motorcycle on the stand and lift the rear wheel off the ground using the rear stand; then, unscrew the central wheel bolt, disconnecting the chain from the sprocket, as shown in the video. Now, unscrew the bolts of the brake caliper, thus removing the rear wheel; if necessary, replace the tyre and reassemble everything, following the video tutorial to the end!

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Wheel of the Kawasaki Z1000
Removing the Front Wheel of the Kawasaki Z1000
Z1000 This guide shows how to remove and replace the front wheel or tyre of the Kawasaki Z1000 motorcycle, following the instructions below. First, place t…
Replacing the Front Headlamp Bulb on a Kawasaki Z1000
Replacing the Front Headlamp Bulb on a Kawasaki Z1000
Z1000 To replace the front bulb on a Kawasaki Z1000, access it from the rear by turning the handlebars to create the necessary space (which will be limited…
How to disassemble the rear wheel on the Kawasaki Z1000?
How to disassemble the rear wheel on the Kawasaki Z1000?
Z1000 In this tutorial we can see how to disassemble the rear wheel on the Kawasaki Z1000, a very simple and quick operation. First of all, we lift the mot…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos