How to Remove the Air Filter on the Kawasaki Ninja 300?

Model: Kawasaki Ninja 300
Part: Air filter

This video is currently unavailable

In this tutorial, you will see how to remove the air filter on the Kawasaki Ninja 300, a very simple and quick operation, for example, if you need to replace or clean it. First, unscrew the indicated screws, then remove the panel located in the lower right area of the seat and take off the additional plastic cover.

Next, grasp the filter, pull it out of its housing, and clean the housing of any dirt residue.

Once the replacement is inserted, you can reassemble everything by following the reverse procedure.

Updated on 30 June 2026 by ScegliAuto

Related tutorials

How to Replace the Air Filter on a Kawasaki Ninja 300

Ninja 300 To replace the air filter on the Kawasaki Ninja 300, loosen the bolts securing the right side panel of the bike, located just in front of the seat. O…

How to Remove the Rear Seat of a Kawasaki Ninja 300

Ninja 300 Before you can begin, position your Kawasaki Ninja 300 upright. Start by inserting the motorcycle key into the designated lock located at the bottom …

How to replace the engine oil in the Kawasaki Ninja 300?

Ninja 300 In this tutorial, we will see how to replace the engine oil in the Kawasaki Ninja 300, a process that is extremely simple and quick. First of all, le…

How to Set the Clock on the Sym Jet14 125?

To adjust the clock on the Sym Jet14 125, turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel is on, press and hold the M button located underneath until one of the numbers on the clock starts flashing. At this point, repeatedly press the S button, also located beneath the panel, to change that number. After making the change, press the M button to move on to the next numbers, finishing by turning off the panel.

Watch the video!

by ScegliAuto

How to Remove the Air Filter on the Kawasaki Ninja 300?

Related tutorials

How to Set the Clock on the Sym Jet14 125?

More videos