Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kawasaki
    3. : Ninja 125

How to Replace the Engine Oil and Oil Filter of the Kawasaki Ninja 125

Model: Kawasaki Ninja 125
Part: Engine oil

Video tutorial

Briefly review the steps to perform the routine maintenance service by replacing the engine oil and oil filter of the Kawasaki Ninja 125 motorcycle. First, place your motorcycle on a stand and begin to unscrew the screws of the plastic fairings; then, unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

At this point, replace the small oil filter cartridge with a new one by unscrewing the screws of the cover found on the right; finally, pour in the engine oil as specified in the owner's manual!


Updated on 12 July 2026 by ScegliAuto


Related tutorials

How do you replace the battery of the Kawasaki Ninja 125?
How do you replace the battery of the Kawasaki Ninja 125?
Ninja 125 To replace the battery of the Kawasaki Ninja 125, you will need to detach the rear part of the seat located near the end of the fender. Once this is …

How to Change the Transmission Oil on a Piaggio Vespa GTS Scooter

In this tutorial, you will see how to change the transmission oil on a Piaggio Vespa GTS scooter, a very simple operation applicable to all engine sizes. First, wait until the engine is completely cold, then position a container underneath the transmission area and, using a 6 mm hex socket spanner, unscrew the drain plug. Allow all the oil contained in the casing to drain out, reinsert the plug, and add the necessary amount of oil through the upper hole. You can use a pump or a syringe to assist with this.

Watch the video!


by ScegliAuto

More videos