Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in the Kawasaki Ninja 300?

Model: Kawasaki Ninja 300
Part: Battery

Video tutorial

Replacing the battery in the Kawasaki Ninja 300 is an extremely simple and quick operation; let's see how to proceed in this tutorial. First, ensure that the key is not inserted, then open the passenger seat and gather the tools provided.

Next, remove the two side panels, then also remove the rider's seat and unscrew the fixing bolt of the ECU. At this point, disconnect both terminals starting with the negative, extract the battery from its housing, and follow the reverse procedure to fit the replacement.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Seat of a Kawasaki Ninja 300
How to Remove the Rear Seat of a Kawasaki Ninja 300
Ninja 300 Before you can begin, position your Kawasaki Ninja 300 upright. Start by inserting the motorcycle key into the designated lock located at the bottom …
How to Replace the Battery on a Kawasaki Ninja 300?
How to Replace the Battery on a Kawasaki Ninja 300?
Ninja 300 On the Kawasaki Ninja 300, to replace the battery, loosen the screws located on the sides of the seat and remove it. Once the seat is detached, you w…
How to Replace the Headlamp Bulb on a Kawasaki Ninja 300
How to Replace the Headlamp Bulb on a Kawasaki Ninja 300
Ninja 300 To replace the headlamp bulb on the Kawasaki Ninja 300, rotate the handlebars in the opposite direction of the bulb to be replaced. This will allow y…

How to Remove the Rear Wheel of the GasGas EC 250?

To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain is removed, you can unscrew the nut that secures the rear wheel spindle and holds it to the swingarm. When the securing spindle is removed, you can completely take out the wheel from its housing and replace it with a new spare part. After replacement, refit the securing spindle and reposition the chain around the sprocket.

Watch the video!


by ScegliAuto

More videos