Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs on a Kawasaki Ninja 300?

Model: Kawasaki Ninja 300
Part: Headlight bulb

Video tutorial

In this tutorial, see how to replace the headlight bulbs on a Kawasaki Ninja 300, a very simple and quick operation. First, ensure the key is not inserted.

Then, locate the large circular cap at the back of the headlight and remove it. Next, disconnect the power connector by pulling it towards you, unclip the indicated metal clip, and remove the bulb from the housing. Now, insert the replacement bulb, avoiding touching the glass with bare hands, and follow the reverse procedure.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to replace the front headlight bulbs on a Kawasaki Ninja 300?
How to replace the front headlight bulbs on a Kawasaki Ninja 300?
Ninja 300 In this tutorial, see how to replace the front headlight bulbs on a Kawasaki Ninja 300, a very simple and quick operation. First, ensure the key is n…
How to Replace the Headlight Bulbs on a Kawasaki Ninja?
How to Replace the Headlight Bulbs on a Kawasaki Ninja?
Ninja 300 .. In this tutorial, you will learn how to replace the headlight bulbs on a Kawasaki Ninja 300, a task that is extremely simple and quick... …
How to Replace the Headlamp Bulb on a Kawasaki Ninja 300
How to Replace the Headlamp Bulb on a Kawasaki Ninja 300
Ninja 300 To replace the headlamp bulb on the Kawasaki Ninja 300, rotate the handlebars in the opposite direction of the bulb to be replaced. This will allow y…

How to Replace the O-ring on the Clutch Rod of the LML Star?

To replace the O-ring on the clutch rod of the LML Star, lift the bike to loosen the side panel located near the rear wheel. Next, unscrew all the screws securing the rear wheel and the corresponding transmission cover: by removing the clutch, you will be able to locate the rod positioned behind it. This rod can now be removed from its housing by unscrewing the fastening screws; after the old rod has been removed, slide out the O-ring, replace it with a new one, and reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos