Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil in a Kawasaki Ninja 300?

Model: Kawasaki Ninja 300
Part: Engine oil

Video tutorial

Changing the engine oil in a Kawasaki Ninja 300, as shown in this tutorial, is an extremely simple and quick operation. First, wait for the engine to cool down sufficiently, then position a container underneath it. Locate the drain bolt and unscrew it with a 5mm hex key. Allow all the oil in the system to drain out, then unscrew the filter using a 17mm hex key and reassemble everything by following the reverse procedure.

At this point, simply insert new oil through the designated hole.


Updated on 19 August 2026 by ScegliAuto


Related tutorials

Ninja 300 In this tutorial we can see how to replace the engine oil in the Kawasaki Ninja 300, an extremely simple and quick operation. First of all, make sure…
Ninja 300 In this tutorial, see how to change the engine oil in the Kawasaki Ninja 300, a very simple and quick operation to perform every 12 months. First, wa…
Ninja 300 .. In this tutorial, you will see how to change the engine oil in a Kawasaki Ninja 300, a very simple and quick operation to perform every.. …

How to Replace the Coolant in the KTM XC 300

Follow this guide on how to replace the coolant in the KTM XC 300 enduro bike, as well as the XC-W 300. First, place your bike on a stand and start by unscrewing the coolant drain screw located at the bottom of the water pump casing, allowing it to drain into a container for about ten minutes; then unscrew the radiator cap as shown in the video. At this point, top up with new coolant suitable for your radiator, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos