Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb on the Kawasaki Ninja 300?

Model: Kawasaki Ninja 300
Part: Light bulb

Video tutorial

To replace the headlight bulb on the Kawasaki Ninja 300, access the rear of the headlight, which is reachable from the back of the front fork, just below the handlebars. There will be a circular cover that needs to be removed to pull out the headlight bulb from its housing.

After the old bulb has been removed, insert the new one into its housing and close it with the cover. Once the replacement is complete, start the bike to check that the bulb works.


Updated on 25 August 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Seat of a Kawasaki Ninja 300
How to Remove the Rear Seat of a Kawasaki Ninja 300
Ninja 300 Before you can begin, position your Kawasaki Ninja 300 upright. Start by inserting the motorcycle key into the designated lock located at the bottom …
How to replace the front headlight bulbs on a Kawasaki Ninja 300?
How to replace the front headlight bulbs on a Kawasaki Ninja 300?
Ninja 300 In this tutorial, see how to replace the front headlight bulbs on a Kawasaki Ninja 300, a very simple and quick operation. First, ensure the key is n…
How to Replace the Headlamp Bulb on a Kawasaki Ninja 300
How to Replace the Headlamp Bulb on a Kawasaki Ninja 300
Ninja 300 To replace the headlamp bulb on the Kawasaki Ninja 300, rotate the handlebars in the opposite direction of the bulb to be replaced. This will allow y…

How to Replace the O-ring on the Clutch Rod of the LML Star?

To replace the O-ring on the clutch rod of the LML Star, lift the bike to loosen the side panel located near the rear wheel. Next, unscrew all the screws securing the rear wheel and the corresponding transmission cover: by removing the clutch, you will be able to locate the rod positioned behind it. This rod can now be removed from its housing by unscrewing the fastening screws; after the old rod has been removed, slide out the O-ring, replace it with a new one, and reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos