Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the chain and sprocket on a Kawasaki Ninja 650

Model: Kawasaki Ninja 650
Part:

Video tutorial

Today's instructions will show you the steps to disassemble and replace the chain and sprocket on the Kawasaki Ninja 650. First, place the rear stand and lift the rear wheel off the ground; then, unscrew the central axle of the wheel, as shown in the video.

At this point, disconnect the drive chain to remove it, unscrewing the bolts of the sprocket to replace it as well; if necessary, also replace the front sprocket, then reassemble the entire transmission kit. Finally, install the chain and adjust it, following the video tutorial to the end!


Updated on 25 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulbs on the Kawasaki Ninja 650?
How to Replace the Front Headlight Bulbs on the Kawasaki Ninja 650?
Ninja 650 In this tutorial, you will learn how to replace the front headlight bulbs on the Kawasaki Ninja 650, a very simple and quick operation. First, ensure…
How to replace the engine oil in the Kawasaki Ninja 650?
How to replace the engine oil in the Kawasaki Ninja 650?
Ninja 650 In this tutorial, we can see how to replace the engine oil in the Kawasaki Ninja 650, an extremely simple and quick operation. First of all, let's ma…
How to Change the Engine Oil in a Kawasaki Ninja 650?
How to Change the Engine Oil in a Kawasaki Ninja 650?
Ninja 650 In this tutorial, you will see how to change the engine oil in a Kawasaki Ninja 650, a very simple and quick operation. First, ensure the engine is c…

How to Replace the Headlight Bulb of a Triumph Speed Twin?

To replace the headlight bulb of the Triumph Speed Twin, you need to loosen the screws that secure the headlight unit in place: these screws will be located at the bottom right and bottom left of the headlight unit. Once these are loosened, you can proceed to pull the headlight from its housing and disconnect the connectors inside: the corresponding bulb can now be extracted from inside the headlight unit, allowing you to insert the new one, remounting all the parts you just removed.

Watch the video!


by ScegliAuto

More videos