Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on a Kawasaki Ninja 650?

Model: Kawasaki Ninja 650
Part: Exhaust muffler

Video tutorial

To replace the exhaust on a Kawasaki Ninja 650, loosen the screws that secure the exhaust end can to its housing on the right side of the rear mudguard. Once the mounting screws are loosened, disconnect the remaining part of the exhaust pipe from the corresponding collector.

This will allow you to completely remove the old exhaust from its housing, so you can insert the new one. The new exhaust can now be secured in place with the corresponding screws and connected to the collector.


Updated on 3 September 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on a Kawasaki Ninja 650
How to Replace the Exhaust on a Kawasaki Ninja 650
Ninja 650 To replace the exhaust fitted on the Kawasaki Ninja 650, loosen the screws located at the exhaust terminal supports. Once the exhaust is fully releas…
How to Replace the Exhaust on the Kawasaki Ninja 650?
How to Replace the Exhaust on the Kawasaki Ninja 650?
Ninja 650 You can replace the exhaust end can on the Kawasaki Ninja 650 by loosening the bolts that secure it to the appropriate supports on the right side of …
Where are the fuses located on the Kawasaki Ninja 650?
Where are the fuses located on the Kawasaki Ninja 650?
Ninja 650 The fuses of the Kawasaki Ninja 650 are located inside the small fuse box installed on the bike: in this model, the fuses are found immediately behin…

How to Change the Transmission Oil on a Piaggio Vespa GTS Scooter

In this tutorial, you will see how to change the transmission oil on a Piaggio Vespa GTS scooter, a very simple operation applicable to all engine sizes. First, wait until the engine is completely cold, then position a container underneath the transmission area and, using a 6 mm hex socket spanner, unscrew the drain plug. Allow all the oil contained in the casing to drain out, reinsert the plug, and add the necessary amount of oil through the upper hole. You can use a pump or a syringe to assist with this.

Watch the video!


by ScegliAuto

More videos