|
Do it yourself
| |||
| ||||
Model: Kawasaki Z125
To change the engine oil of the Kawasaki Z125, loosen the drain plug located at the central lower part of the vehicle, allowing all the used oil to flow into a suitably positioned container. Once the oil has completely drained, remove the filter located at the front of the bike, just behind the wheel. After replacing the filter, top up the oil by adding the necessary amount through the breather on the right side of the bike.
Updated on 12 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Z125
In this tutorial, we will see how to change the engine oil in a Kawasaki Z125, a very simple and quick operation. First, wait for the engine to cool …
Z125
In this tutorial, you will see how to change the engine oil in a Kawasaki Z125, a very simple and quick operation. First, ensure that the engine is c…
Z125
To replace the exhaust on a Kawasaki Z125, loosen the screws that secure it to its housing located on the right side of the bike, near the rear wheel…
|
How to Replace and Install the Front Wheel on a Beta RR 300
Today, we will go through the instructions to install or replace the front wheel on the Beta RR 300 enduro bike by following these simple steps. First, place your bike on a stand and lift the front wheel off the ground. Next, unscrew the fixing bolts of the front brake caliper to remove it. At this point, unscrew the central axle of the wheel, removing and possibly replacing the tyre. Then, tighten the fork nuts and reassemble everything by reversing the disassembly procedure! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
