Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of a Kawasaki Ninja?

Model: Kawasaki Ninja 650
Part: Engine oil

Video tutorial

To change the engine oil of a Kawasaki Ninja, start by positioning the bike on a centre or side stand for stability. Ensure the engine is warm, not hot. Locate the oil drain plug on the lower engine casing and place a container underneath to collect the used oil. Use a spanner to remove the drain plug and allow the used oil to drain completely.

Check the seal on the plug to ensure it is in good condition. Once draining is complete, refit the drain plug and secure it tightly.

Now find the oil filler cap located on top of the engine and remove it. Use a funnel to pour new engine oil into the reservoir, ensuring you adhere to the recommended viscosity and quantity specifications for your Kawasaki Ninja. Once the oil is added, replace the filler cap and secure it tightly.

Start the engine and let it run for a few minutes to distribute the new oil evenly. Finally, check the oil level using the dipstick and add more oil if necessary.

Once this procedure is complete, you will have successfully changed the engine oil of your Kawasaki Ninja.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Kawasaki Ninja 650?
How to Change the Engine Oil on a Kawasaki Ninja 650?
Ninja 650 To change the engine oil on a Kawasaki Ninja 650, it is important to start by warming up the engine for a few minutes, so the oil becomes more fluid …
How to Change the Engine Oil on a Kawasaki Ninja 650?
Ninja 650 To change the engine oil on a Kawasaki Ninja 650, start by warming up the engine for a few minutes so that the oil becomes more fluid and easier to d…
Replacement of the engine oil cup of the Kawasaki Ninja 650
Replacement of the engine oil cup of the Kawasaki Ninja 650
Ninja 650 Today's instructions will allow us to disassemble and replace the oil sump of the Kawasaki Ninja 650. First, we put the motorcycle on the stand and s…

How to Replace the Rear-View Mirror on a Piaggio Vespa 125 Primavera?

To replace the rear-view mirror on a Piaggio Vespa 125 Primavera, lift the rubber cover at the base of the mirror. Underneath, you will find the nut that needs to be loosened to free the mirror from its position. This should then be turned counterclockwise to remove it completely. The new mirror can then be inserted and tightened by turning it clockwise. Finally, secure it with the corresponding nut and reposition the rubber cover at the base of its housing.

Watch the video!


by ScegliAuto

More videos