Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front headlight of the Keeway Superlight 125?

Model: Keeway Superlight 125
Part: Headlight

Video tutorial

In order to replace the front headlight of the Keeway Superlight 125, you need to loosen the screws that attach it to its housing in the front of the motorcycle: these screws will be located at the bottom of the headlight assembly and on the two side parts.

Once all the fixing screws have been unscrewed, it will be possible to completely detach the headlight assembly from its housing and disconnect the connectors located at the back: you can then connect the new headlight assembly in such a way that it is inserted into the seat, fixing it properly.


Posted on 12 September 2025 by ScegliAuto


Related tutorials

How to replace the rear lamp bulb on a Keeway Superlight 125?
How to replace the rear lamp bulb on a Keeway Superlight 125?
Superlight 125 To replace the rear lamp bulb on a Keeway Superlight 125, loosen the screws securing the lamp and the corresponding chrome part surrounding it. Once …
How to Start a Keeway Superlight 125
How to Start a Keeway Superlight 125
Superlight 125 Start by sitting on the rider's seat of your Keeway Superlight 125. Next, insert the key into the ignition switch and turn the key to activate the da…
How do you replace the headlight bulb of the Keeway Superlight 125?
How do you replace the headlight bulb of the Keeway Superlight 125?
Superlight 125 To replace the headlight bulb of the Keeway Superlight 125, you need to loosen the screws that secure the headlight assembly to its housing: this wil…

An Affordable Modification to Solve a Problem on the Yamaha MT07

This video shows how to solve a problem affecting the Yamaha MT07 with a very affordable modification. This bike requires a specific movement of the throttle grip to accelerate, which forces the right wrist into an unnatural twist. You can remedy this by fitting the throttle control from the R6, which reduces the rotation from 90° to 45°; the cost is under £25 even when buying the original part directly from the dealership. As shown, the disassembly and reassembly work is extremely simple; just be careful not to let the throttle guide slip, as it has its seat directly in the cover. You can see the difference in hand position after replacing the grip.

Watch the video!


by ScegliAuto

More videos