Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the engine of the Keeway Superlight 125?

Model: Keeway Superlight 125
Part: Engine

Video tutorial

In order to remove the engine of the Keeway Superlight 125 from its housing, you will need to unscrew the screws that secure the engine to the appropriate supports: these screws will be located on the bottom and top of the engine block. Before removing it from its seat, it will also be necessary to disconnect all the connectors related to the sensors that are present on the engine and loosen the intake and exhaust manifold screws: at this point it will be possible to remove the engine block from its housing, so that the new engine block can be inserted.


Posted on 17 October 2025 by ScegliAuto


Related tutorials

How to Start a Keeway Superlight 125
How to Start a Keeway Superlight 125
Superlight 125 Start by sitting on the rider's seat of your Keeway Superlight 125. Next, insert the key into the ignition switch and turn the key to activate the da…
How to Dismantle and Clean the Carburettor of the Keeway Superlight 125
How to Dismantle and Clean the Carburettor of the Keeway Superlight 125
Superlight 125 In today's video tutorial, you will learn how to dismantle and clean the carburettor of the Keeway Superlight 125 motorcycle by following these simpl…
Change the Engine Oil and Oil Filter on the Keeway Superlight 125
Change the Engine Oil and Oil Filter on the Keeway Superlight 125
Superlight 125 In this brief and simple guide, we will go through the step-by-step instructions to perform the routine maintenance service by changing the engine oi…

An Affordable Modification to Solve a Problem on the Yamaha MT07

This video shows how to solve a problem affecting the Yamaha MT07 with a very affordable modification. This bike requires a specific movement of the throttle grip to accelerate, which forces the right wrist into an unnatural twist. You can remedy this by fitting the throttle control from the R6, which reduces the rotation from 90° to 45°; the cost is under £25 even when buying the original part directly from the dealership. As shown, the disassembly and reassembly work is extremely simple; just be careful not to let the throttle guide slip, as it has its seat directly in the cover. You can see the difference in hand position after replacing the grip.

Watch the video!


by ScegliAuto

More videos