Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Keeway
    3. : Vieste Xdv 125

How to replace the engine oil in the Keeway Vieste XDV 125 scooter?

Model: Keeway Vieste Xdv 125
Part: Engine oil

Video tutorial

In this tutorial, we will see how to replace the engine oil in the Keeway Vieste XDV 125 scooter, a very simple and quick operation. First of all, let's make sure that the engine is cool enough.

Then, we place a container underneath the scooter, locate the bolt of the drain hole, and unscrew it using a 17mm socket wrench. Next, let all the oil contained in the system drain out. We then open the filter cap with an 8mm wrench and insert the replacement.

At this point, all that's left to do is reassemble everything and pour in the necessary amount of oil through the designated upper hole.


Posted on 13 December 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil of a Keeway Sip 125?
How to Change the Engine Oil of a Keeway Sip 125?
Sip 125 To replace the engine oil of a Keeway Sip 125 scooter, start by positioning the scooter on a flat surface. Next, lift the scooter using the centre st…
How to Change the Engine Oil on the Keeway KBlade 125
How to Change the Engine Oil on the Keeway KBlade 125
Kblade 125 In today's video tutorial, you will learn how to change the oil during the regular maintenance service on a Keeway KBlade 125 scooter. First, positio…
Guide to replacing the engine oil of the Keeway Logik 125
Guide to replacing the engine oil of the Keeway Logik 125
Logik 125 Today we will see the necessary information to carry out the routine maintenance check, replacing the engine oil, on the Keeway Logic 125 scooter. Fi…

How to Replace the Front Headlamp of the Harley Davidson Street Glide

Today, we will provide step-by-step instructions to remove and replace the front headlamp of the Harley Davidson Street Glide. First, place the motorcycle on a stand and begin by removing the metal side frame by undoing the fixing screw; then remove the front optical unit by disconnecting the bulb's electrical connector, as shown in the video. At this point, install the new optical unit, checking its operation and making adjustments if necessary; finally, reattach the metal side frame.

Watch the video!


by ScegliAuto

More videos