|
Do it yourself
| |||
| ||||
|
Model: Keeway Superlight
In this video tutorial, learn how to remove the seat (single seat for rider and passenger) from a Keeway Superlight. First, remove the side fixing screws of the seat using a socket spanner; then remove the rear screw using a 13 mm spanner. At this point, lift the seat upwards to remove it, as shown in the video. For reassembly, simply reverse the process; place the seat back, aligning all the screw holes, and tighten correctly, as illustrated in the video!
Updated on 1 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Superlight
To replace the air filter of the Keeway Superlight, loosen the screws securing the triangular cover located just under the seat on the right side of …
Superlight
In order to replace the front brake pads of the Keeway Superlight, you need to loosen the screws that secure the front brake caliper to its housing, …
Superlight
To replace the headlamp bulb on a Keeway Superlight, you need to loosen the screws located at the bottom of the headlight assembly. Once these screws…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.174
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
