Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Keeway Rkf 125
Part:

Watch this video for the main steps to remove and replace the brake and clutch levers on a Keeway RKF 125. First, remove the clutch lever; you will need a cross-head screwdriver and an 8 mm socket to hold the nut at the bottom, as shown in the video. Next, disconnect the clutch cable to remove and replace the lever. Similarly, remove the front brake lever and replace it with the new one; then adjust the lever travel!

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the clutch of the Keeway RKF 125?
How do you replace the clutch of the Keeway RKF 125?
Rkf 125 The clutch replacement of the Keeway RKF 125 can be carried out by loosening the screws that fix the covering casing located on the right side of the…
How do you replace the rearview mirrors of the Keeway RKF 125?
How do you replace the rearview mirrors of the Keeway RKF 125?
Rkf 125 In order to replace the rearview mirrors of the Keeway RKF 125, you need to grab the old ones, so that you can rotate them counterclockwise to remove…
How do you replace the exhaust pipe of the Keeway RKF 125?
How do you replace the exhaust pipe of the Keeway RKF 125?
Rkf 125 The exhaust terminal of the Keeway RKF 125 can be replaced by loosening the screws that fix it at the lower support near the crank and at the rear wh…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos