Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Keeway K-Blade 125

Model: Keeway Kblade 125
Part: Brake pads

Video tutorial

To replace the front brake pads on the Keeway K-Blade, remove the central pin that secures the front wheel to the swingarm, allowing the wheel to be taken off. Once the wheel is removed, unscrew the bolts that secure the caliper to the swingarm. This will allow you to detach the caliper and access the pads inside, which need to be extracted and replaced with new spare parts.

After removal, insert the new pads and reassemble all the components.


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to Set the Clock on the Keeway K-Blade 125?
Kblade 125 .. To set the clock on the Keeway K-Blade 125, turn the key to switch on the instrument panel and hold down the two buttons located just.. …
How to Replace the Air Filter on the Keeway K-Blade 125?
How to Replace the Air Filter on the Keeway K-Blade 125?
Kblade 125 .. To replace the air filter on the Keeway K-Blade 125, loosen the screws securing the cover containing the air filter, located on the left side of.. …
How to Replace the Air Filter on the Keeway K-Blade 125?
Kblade 125 .. To replace the air filter on the Keeway K-Blade 125, loosen the bolts securing the cover near the rear wheel, just above the clutch cover. Once.. …

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos