Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Keeway Cafe Racer 152
Part:

In this guide, learn how to remove the seat of the Keeway Cafe Racer 152 by following the instructions below. First, place your motorcycle on the centre stand and begin to unscrew the screws securing the side plastics using a cross-head or flat screwdriver; once removed, you can take off the rear part of the seat, as shown in the video. At this point, unscrew the side screws of the seat, thereby removing it from the frame; then install the new seat by applying the reverse procedure for reassembly!

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Seat from a Keeway Café Racer 152
How to Remove the Seat from a Keeway Café Racer 152
Cafe Racer 152 Start by removing the side plastic fairings that cover the bolts securing the seat of your Keeway Café Racer 152, using a socket key and a spanner wh…
How to disassemble the fuel tank and ignition coil of the Keeway Cafe Racer 152
How to disassemble the fuel tank and ignition coil of the Keeway Cafe Racer 152
Cafe Racer 152 In this guide, we will see the steps useful for disassembling and replacing the fuel tank and ignition coil of the Keeway Cafe Racer 152 motorcycle. …
How to Remove the Air Filter Block from a Keeway Café Racer 152
How to Remove the Air Filter Block from a Keeway Café Racer 152
Cafe Racer 152 Before you start, position your Keeway Café Racer 152 on its side stand. Begin by unclipping and removing the side fairing located under the seat. Ne…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos